How to resolve unidentified network in windows 10: Solutions that work

How to resolve unidentified network in Windows 10


Unidentified Network is a fairly common problem in Windows 10, and dealing with it can be extremely frustrating. This problem in Windows can occur for a variety of reasons.

 The good news is that there are numerous approaches you can take to address the issue. Continue reading to learn how to resolve Unidentified Network in Windows 10.


What causes Windows 10's Unidentified network?

Although there are numerous causes for the Unidentified Network error in Windows 10, the most common is incorrect IP configuration settings. Another possibility is that your network settings are incorrect.

An old or corrupt network card driver could also be the source of the problem. The disadvantage of the unidentified network issue is that it prevents you from accessing the internet through your browser, even if you have a working internet connection.

 That's too bad, right? If you run into this problem, don't worry; you can fix it by following the instructions below.


How do I resolve the Unidentified Network error in Windows 10?

There are numerous options available to you for resolving the Unidentified Network problem on your Windows 10 computer. These include turning on and off airplane mode, changing the Ethernet cable, updating network card drivers, temporarily disabling security software, and turning off fast startup feature and restarting your modem or router.

Let's take a closer look at these methods.


1. Replace your Ethernet cable


If you're using an Ethernet (LAN) cable, the first thing you should try is changing the Ethernet cable. A faulty Ethernet cable may be the source of the problem, so replacing it may be beneficial.

 If you have an Ethernet cable connected but the network is showing Unidentified, you should consider connecting to a wireless network (Wi-Fi) instead. If that doesn't work, try the methods listed below to resolve the problem.


2. Activate and deactivate flight mode

If you're in flight mode, you're disconnected from all networks. Having said that, if you are experiencing the Unidentified Network issue, it is critical that you check to see if flight mode is turned off.

 Many users reported that turning off flight mode fixed the problem. Let's take a look at how to disable flight mode.

i)Switch to settings, then to Network and Internet. Then select the flight mode option. Now, turn off the flight mode.

ii) Use the Wi-Fi icon: To turn off flight mode, click the Wi-Fi icon in your taskbar. All you have to do is go to your taskbar's Wi-Fi or network icon and disable flight mode, if it's enabled.

If flight mode is turned off, you can try turning it on and then off again. This may resolve the problem.


3. Install the most recent network card drivers

Unknown network issues are frequently caused by out-of-date network card drivers. When you encounter the unidentified network problem, try updating network card drivers to see if this resolves the problem.

You can accomplish this in two ways, which we will demonstrate below.

i)                    Update Windows- To use this method, first navigate to Windows 10 settings, then to update and security. Now, click the View Additional Updates link to see if a network driver update is available.

 Install the update and restart your computer if it is available. Check to see if the problem has been resolved.


ii)                   Go to the OEM website and download the most recent version: To do this, launch device manager and navigate to the network adaptor. Now, navigate to the Drivers tab and note the driver version.

                      Go to the Wi-Fi adapter OEM website and look for the most recent version. If there are any, make a restore point on your computer and then install the most recent driver.


4. Disable the security software for the time being

Security software is frequently to blame for network connectivity issues. Security software is essential, but if you are experiencing the Unidentified Network issue, you may want to temporarily disable security software. To do so, right-click on the antivirus software icon and select Disable. Check to see if the problem persists.

If you're using Windows firewall, try resetting its settings to default to see if the problem goes away. Some users have reported that disabling VPN software can also fix unidentified network in Windows 10, so it's worth a shot.


5. Disable the fast startup feature

Windows can boot quickly thanks to the fast startup feature. This feature, however, has the potential to cause issues such as the Unidentified Network issue. To resolve the unidentified network issue, disable the feature. Follow the steps outlined below to accomplish this.

i) In the Windows search bar, type Power Options. Now, open the Power Options dialog box and configure what the power button does.

ii) Next, select Change settings that are currently inaccessible.

iii) The next step is to uncheck the box labeled "Turn on fast startup." After that, restart your computer to make the changes take effect. Now, see what the power button does.

ii) Next, select Change settings that are currently inaccessible.

iii) The next step is to uncheck the box labeled "Turn on fast startup." After that, restart your computer to make the changes take effect. Check to see if the network connectivity issue has been resolved.


6. Alter your DNS servers

Custom DNS server addresses provided by Internet Service Providers can be slow, so changing them can resolve network connectivity issues on Windows. You can improve website access by using Google Public DNS or Cloudfare DNS. Change your DNS servers now by following the steps outlined below.

i)                    First, press the Windows key + X or right-click on the start button.

i)                     ii) Next, select Network Connections and navigate to your network connection and right-click on it.

ii)                   After you right-click on your network, click on properties.

iii)                  Next double click on Internet Protocol Version 4(IPV4)

iv)                 Now the next step is to select “Use the following DNS server addresses and set but the preferred and alternate DNS server address “as follows:

 Preferred DNS server:

 Alternate DNS server:


7. Check your network connection

The Windows 10 operating system is fantastic because it includes a built-in network troubleshooter that you can use to troubleshoot network connectivity issues. This troubleshooter is located in the Troubleshoot section and can be accessed in two ways.

The first method diagnoses a specific network adaptor, while the second method diagnoses the entire network.

i) Troubleshooting a specific network adaptor


• To begin, press the Windows key + X or right-click on the start button.


• Next, navigate to Network Connections.


• Right-click on your network connection. When you select diagnose, an automatic troubleshooter will launch.


 ii) Troubleshooting a specific network adapter

• First, navigate to Settings and click on it. • Next, navigate to Update and Security and click on it.

• Select Troubleshoot, then Additional Troubleshooter. • Locate and launch the network adapter.

• Finally, check to see if the problem has been resolved.


8. Reboot your modem or router

If you know your computer's network adaptor and network are both operational, this method is worth a shot. To restart your modem or router, follow the steps outlined below.

i) First, turn off your modem and router, but keep them physically connected.

ii) Next, start the modem and wait for half a minute after all of your modem's lights turn green

If none of the above methods work, you could try running ipconfig commands from the command prompt. To open Command Prompt, type it into the Windows search bar and select Run as administrator.

Once open, enter the following ipconfig commands one by one and restart your machine.

ipconfig  /release

ipconfig  /renew

netsh  /winsock  reset

netsh  int  ip  reset

ipconfig  /flushdns

ipconfig  /registerdns

netsh int tcp set heuristics disabled

netsh  int tcp set global autotuninglevel=ddisabled

netsh int tcp set global rss=enabled

netsh int tcp show global



The network unidentified problem can be inconvenient. However, by following the steps outlined above, you may be able to resolve the problem. Why not give them a shot and have fun while using the internet? Best wishes!



You must be logged in to post a comment.

About Author
Recent Articles